Fragrance Lamps, Stone Burner and Wicks - Proper Use, Care, and Cleaning

Catalytic Effusion Fragrance Lamps and Fuels cleanwon't work and you will ruin your Stone Burner
your breathing air, killing up to 85% of all germs- DO NOT soak dirty, gummed up wicks in cleaning
floating around in your home. Fragrance Lamps alsosolution trying to get it clean - you are just letting
produce those feel good things called "Negative Ions".the sediments settle into your stone burner
Your Catalytic Fragrance Lamp will give you many- your Stone Burner/Wick will have a very small wire
years of tantalizing aromas and CLEAN HEALTHYthat goes over top of the burner. DO NOT EVER
BREATHING AIR by following a few simple steps toREMOVE THAT WIRE. A Catalytic Stone Burner and
keep your Stone Burner and Wick clean and in goodWick is not like any other type of wick.
working condition. The Stone Burner is the working- Do not push/pull the wick up through the stone
part of these Hand Blown Glass Catalytic Fragrancebuner like a traditional wick. These wicks are just not
Lamps.made that way and you will ruin it
The technology behind the fragrance lamp was- to clean your stone burner and fragrance lamp at
invented by European scientists in the mid 1800's.the same time, burn some 4-in-one-solution in your
The scientists were searching for a method offragrance lamp. Then you'll clean your lamp,burner,
disinfecting and purifying air, and discovered thatand your breathing air all at the same time
using a simple catalytic process (no flame) would- You can use our Onaya Fragrance Fuels in any
accomplish their mission. And the Catalytic Effusionbrand of Catalytic Effusion Fragrance Lamp
Lamp was born! [they probably called it something aFragrance Lamp Safety Tips
bit different though] It was later discovered that you1. Treat fragrance fuel just like you would isopropyl
could add fragrances to the recipe and have greatalcohol. Do not store it next to an open flame and do
aromas filling their space, while still disinfecting the air.not allow children to touch your Fragrance Lamp while
HOW TO LIGHT A FRAGRANCE LAMPin use.
- fill the lamp no more than 2/3 full with Fragrance2. Never leave the stone burning with an open flame
Fuel. Run the Wick down into the lamp, allowing the3. Use the small funnel included with your Fragrance
Stone Burner to rest snugly on top of the metalLamp to pour the Fragrance Fuel into the Fragrance
band at the top of the Fragrance Lamp. Place theLamp. Always clean any spills of fuel immediately and
snuffer cap over the stone burner. After 20 minutesbefore you light the lamp.
remove the snuffer cap, light the stone burner and4. Don't fill your lamp all the way to the top. 2/3 - 3
allow the flame to burn for 3 - 4 minutes. Blow the4 full is fine
flame out and place the large decorative vented cap5. Never place snuffing cap over an open flame.
over the stone burner and enjoy!6. Do not refill the fragrance lamp until stone burner is
DO NOT ALLOW THE FLAME TO BURN LONGERcool to touch.
THAN 4 MINUTES! or you may ruin your stoneFragrance fuel is fragrance oil suspended in an
burner.isopropyl alcohol base. This fragrance lamp fuel is the
TURNING A FRAGRANCE LAMP OFFwhen you wantbase of the catalytic process which effuses the
to 'turn your lamp off', do one of the followingfragrance into the air.my own experience
1] If you are going to be lighting your FragranceThe instructions provided above are based on the
Lamp again in the next few days and you still have 2basics included with Catalytic Fragrance Lamps, with
or 3 inches of Fragrance Fuel in the lamp, place themy own updated findings over the past couple of
snuffer cap over the stone burner. Then when youyears. The testing and research I have done has
are ready to relight your lamp, simply followtaken me thru several of the Stone Burners while
directions above on "How To Light A Fragrancedetermining what can and cannot be done with these
Lamp" OR if necessary, remove the burner and wickwicks.
and add more fuel. Then place the burner and wickBut Onaya's latest Stone Burner and Wick lasts
back into your lamp and light itlonger, are much easier to care for, and can take
ORmore abuse or forgetfulness. Like when you forget
2] If you are NOT going to be using your lamp for ato place the snuffer cap on when all the fuel is gone.
few days or longer, after the stone cools to theIf your lamp goes out [runs out of fuel] and you
touch, remove it from the lamp. Place your burnerdon't put the snuffer cap on immediately, NO
and wick on a clean paper towel allowing the towelPROBLEM! The new Onaya Stone Burners will fire
to soak up the excess fuel - IF your lamp still hadright back up even if you leave the cap off for a
fuel in it- Then pour about 1/3 cup 4-In-One Solutionfew days!
for fragrance lamps into a clean bowl, and swish yourIf you haven't tried one of the new Stone Burner
burner/wick around in the solution. DO NOT let yourand Wick Assembly's from Onaya, you are missing
dirty burner/wick soak in the solution.out on a great stone burner. They are so much
Care of Stone Burner and Wick Assembly foreasier to care for.
Catalytic Fragrance LampsALWAYS USE NAME BRAND, QUALITY
- IF you let your fragrance lamp go out, put theFRAGRANCE FUELS IN YOU FRAGRANCE LAMP, OR
snuffer cap on your fragrance lamp or you will ruinYOU WILL RUIN YOUR STONE BURNER and WICK.
any fragrance fuel left in the lamp. The antiseptic willI hope this has helped some to better understand
evaporate and your fuel will no longer burnjust what a Catalytic Effusion Fragrance Lamp is, and
- NEVER USE ANY TYPE OF FRAGRANCE OR FUELhow to use them properly to achieve the longest
OR OIL OTHER THAN THE FRAGRANCE FUELlasting fragrance, and best performance.
THAT IS MADE FOR THESE FRAGRANCE LAMPS! It